|CHEMICAL ANCHORS > KLP Chemical Capsule (Made in
For use a high strength, non-shrink anchor grouting
Styrene free methylmetacylate system Spin-in Capsules are a well
known and reliable means for anchoring rods in solid materials such as concrete, rocks,
Anchoring threaded rod and rebar in solid base materials
1 capsule ‘’4’’ 1 hole = 0 mistake!
Spin-in Capsules are designed specially for anchoring threaded rods for high
performance and demanding applications
Fast cure, clean with no waste
Easy to use and reliable
High capacity in non-cracked concrete
Made in Europe
receive adhesive must be clean and free of concrete dust and/or dirt, oil or grease. For dependable
results, adhesive should be applied in dry conditions. Do not install in or through standing water. The base
material must be -5℃ or above at the time of installation. ALWAYS WEAR EYE PROTECTION!
KLP: Glass capsule with resin, hardener and
Non-cracked concrete C20/25 to C50/60 (B25
24 months from date of manufacture in
Dry, dark, at a temperature between 5℃ and
25℃. Avoid direct sunlight.
If Broken - Allow for material to cure.
Cured Material - Clip or grind off surface.
Let anchor fully cure without
After drilling and cleaning the hole, the
capsule is inserted into the hole and the anchor stud is driven with a rotating/hammering action. This breaks the
capsule and mixes the contents. The resulting chemical reaction creates a durable expansion pressure free bond
between the anchor stud, the reacted resin, and the concrete.
During installation, the capsule is crushed and the rotating
and hammering action mixes the contents. After the recommended cure time, the fi xture can be installed and the fi
xing can be loaded.
Type of KLP
RFB Threaded Stud with hex head, hex nut and
RFB's are pre-cut threaded rod, supplied
with a nut and washer. For use with Simpson Strong-Tie adhesives and chemical capsules.
Back to Chemical